This is a new technique I came up with for my King or Puppet? build. A relatively new piece, Bar 1L with 1 x 1 Round Plate with Hollow Stud,…
Here is a useful design when you want to build the interior of a rounded wall. The basic structure is made of hinge plates and brick modified with stud. Typical…
Our latest furniture guide covers a bookshelf, elegant vase, chair, and side table. Unlike most of our book shelves this one has just a single shelf. 1×2 brackets are used…
Small models like this can be very helpful in fleshing out large displays. It starts with inverted slopes and 1×1 plates to lift the coop a bit off the ground.…
This is a handy technique for small towers or columns. 1×1 round plates and travis bricks make up the core. This assembly will be repeated and stacked atop each other…
This is a useful design that I used in my 08 Nighthawk build. It’s all based around SNOT connections using headlight bricks and brick modified with stud. A square of…
Here is yet another furniture guide covering four medieval designs. First is a large book case I designed for use in my Royal Dance scene. Some plates and tiles are…
This was a requested tutorial and covers not only the basic tower design, but also how to make the floor, arrow slits, and battlements. The main structure of the tower…
It’s been a little while since our last tutorial with all the Summer Joust prizes we’ve been busy with. This guide covers a simple technique for combining macaroni tiles with…
This guide takes a look at the technique I used in my 08 Nighthawk model to achieve a large tapering cylinder. The cylinder itself is mostly four stud wide sections…
