This technique was designed to work with my Bar and Clip Brickwork. 1×1 brick with stud are used to attach 1×1 bricks and cheese slopes for the stonework on either…
This guide covers a bed, small cupboard, bookshelf, and throne. First is the bed design Isaac came up with for use in Noctura’s Keep.A simple platform of plates is used…
Every so often I get the urge to make a wheeled vehicle. Which was the case in February when I built this Rebel Wrangler. I started off with a few…
Here is the breakdown of the cider press design we came up with for my Apple Pressing build. Several brick modified with stud are used to connect the various elements…
I started off 2019 with a star fighter for Space Jam, and this post details its build process. First I tried experimenting with the cockpit using a printed Space Police…
This guide explains a neat conical roof that works with the limited parts selection in purple. The base is made of this purple element, while the reddish brown pieces simply…
This is the last build log featuring one of our 2018 models – fitting since it was also my last build of 2018! Two layers of plates put together in…
Here is a useful design when you want to build the interior of a rounded wall. The basic structure is made of hinge plates and brick modified with stud. Typical…
This was one of my bigger entries for the last CCC, and fortunately we did get a good number of pictures during the build process. I started off with some…
Small models like this can be very helpful in fleshing out large displays. It starts with inverted slopes and 1×1 plates to lift the coop a bit off the ground.…
